Products Lubricants & Cleaners

Lubricants & Cleaners

Ensure smooth operation and lasting protection with our premium lubricants and cleaners—reducing friction, preventing wear, and keeping equipment at peak efficiency.

ETERNA-LUBE #1000

Product Code: A014

N.W. 15 Ounce / Size 15 Ounce

Sealweld Eterna-Lube #1000 is a superior multi-use, anti-seize compound formulated to provide rust and corrosion protection for all metal surfaces by forming a protective coating. Enhanced with additives that create an impenetrable barrier that will withstand extreme heat, pressure and friction, reduce torque requirements and eliminate wear.

This waterproof and non-melting compound is resistant to chemicals and gases (excluding oxygen). It is recommended for valve seats in high-temperature services like hydrocarbons, hot air, and steam. Suitable for various applications, except high-speed bearings.

Recommended for use in: Valve stems, gear boxes, expansion joints, conveyor belts, air motors, pumping mechanisms, all threaded connections, hand and motor-operated valves, gaskets, flanges, O-rings, bushings, bearings, rollers, gears, transmission boxes, chains, drives, automotive chassis, wheel bearings, universal joints, electric motors, compressors, hoists, turbines, winches, furnaces, burner assemblies, regulators, pumps, control chests, headers, cylinder head assemblies, gasket manifold assemblies, stud assemblies, fuel injectors, pre-combustion chambers, valve cages, turbo charger fittings, guides, fine thread tubing, compressor cages, silencer piping, shaft coupling bolts, keyways, spark plugs, torque rod pins and lubes, air cylinder assemblies, pneumatic cylinder shafts, liquid fuel pumps, air slides and axle shafts.

NOT recommended for use in high-speed bearings.

Product Details

Base Oil	Synthetic
Colour	Silver Grey
Drop Point	+327 °C or +621 °F
NLGI Grade	1
ASTM Penetration	240-330
Specific Gravity	1.3
Flash Point (Base Oils)	+320 °C or +575 °F
Thermal Decomposition Point	+371 °C or +700 °F
Spontaneous Ignition Point	+487 °C or +910 °F
Freeze Point	-22 °C or -8 °F
Temperature Range	-40 °C to +1093 °C
	-40 °F to +2000 °F

Order Details

Ordering Size	Part No.
16 Ounce Brush Top Can	S-EL-BT
16 Ounce Brush Top Can- 12/Case	S-EL-BTC
11 Ounce Cartridge – 1 Single	S-EL-HG
15 Ounce Cartridge – 1 Single	S-EL-SG
11 Ounce Cartridges – 16/Case	S-EL-HGC
15 Ounce Cartridges – 12/Case	S-EL-SGC
10 Pound Can	S-EL-10P
40 Pound Pail	S-EL-40P
120 Pound Drum	S-EL-120D
400 Pound Drum	S-EL-400D

LOW-TEMPERATURE LUBRICANT D-1014

Product Code: A011

N.W. 15 Ounce / Size 15 Ounce

Sealweld Low-Temperature Lubricant D-1014 is a proprietary blend of synthetic materials formulated with low-temperature additives. It significantly reduces torque requirements and counteracts the extreme drying effects caused by liquefied petroleum gases. This lubricant continues to provide lubrication long after other types of lubricants have been washed away. It is particularly well-suited as a gear box lubricant.

Sealweld Low-Temperature Lubricant D-1014 is recommended for use in LPG/NGL services, including propane, butane, ethane, ethylene, and related by-products. It is ideal for application in ball, gate, plug, wellhead valves, and other valves designed to be kept offline in extreme climate conditions. These valves must remain available for actuation, such as in the case of pig traps and launchers.

Product Details

Base Oil	Synthetic
Colour	Grey
Drop Point	None
Texture	Thin Paste
Pressure	10,000 PSI
ANGLI Grade	1
ASTM Penetration	230-330
Special Additives	Graphite and PTFE
Flash Point	+221 °C or +430 °F
Melting Point	None
Temperature Range	-54 °C to +204 °C
	-75 °F to +400 °F

Order Details with PTFE

Ordering Size	Part No.
11 Ounce Cartridge – 1 Single	S-DS-HG
15 Ounce Cartridge – 1 Single	S-DS-SG
11 Ounce Cartridges – 16/Case	S-DS-HGC
15 Ounce Cartridges – 12/Case	S-DS-SGC
10 Pound Can	S-EL-HGC
15 Ounce Cartridges – 12/Case	S-DS-10P
40 Pound Pail	S-DS-40P
120 Pound Drum	S-DS-120D
400 Pound Drum	S-DS-400D

Order Details No PTFE

Ordering Size	Part No.
11 Ounce Cartridge – 1 Single	S-DSX-HG
15 Ounce Cartridge – 1 Single	S-DSX-SG
11 Ounce Cartridges – 16/Case	S-DSX-HGC
15 Ounce Cartridges – 12/Case	S-DSX-SGC
10 Pound Can	S-DSX-10P
40 Pound Pail	S-DSX-40P
40 Pound Pail	S-DS-40P
120 Pound Drum	S-DSX-120D
400 Pound Drum	S-DSX-400D

TOTAL-LUBE #911

Product Code: A010

N.W. 15 Ounce / Size 15 Ounce

Sealweld Total-Lube #911 provides an effective film of lubricant to protect seal faces and reduce torque requirements. Incorporated with microscopic particles of PTFE, Total lube will seal minor scratches to sealing sufaces and shallow corrosion pits. Seals scratches up to 0.010” and nicks and cuts on soft seats.

This product is specifically Designed specifically as an all-purpose seat lubricant/ sealant to extend the maintenance interval in severe service and critical service valves. Sealweld® Total-Lube #911 is insoluble in water, oil, natural gas and related by-products. Suitable for sour service valves. for use in ball, gate, and plug valves as well as orifice fittings. Use at refineries, wellheads, pump or compressor stations and in g as distribution systems. Excellent for plug valve maintenance.

Product Details

Base Oil	Synthetic
Colour	White
Drop Point	None
Texture	Tacky
Pressure	10,000 PSI
ASTM Penetration	170 – 250
Compatibility	Excellent
Solvent Resistance	Excellent
Special Additives	PTFE
Particle Size	Micronized
Composition	Semi-liquid
Temperature Range	-29 °C to +232 °C
	-20 °F to +450 °F

Order Details

Ordering Size	Part No.
‘A’ Stick – 1/4” x 1” – 108/Box	S-TL-108A
‘B’ Stick – 3/8” x 1-1/2” – 72/Box	S-TL-72B
11 Ounce Cartridge – 1 Single	S-EL-HG
‘C’ Stick – 7/16” x 2-1/8” – 32/Box	S-TL-32C
11 Ounce Cartridges – 16/Case	S-EL-HGC
‘D’ Stick – 1/2” x 2-1/4” – 28/Box	S-TL-28D
‘G’ Stick – 5/8” x 3-1/2” – 14/Box	S-TL-14G
‘J’ Stick – 1-3/8” x 8-1/2” – 1 Stick	S-TL-J
‘J’ Stick – 1-3/8” x 8-1/2” – 6/Box	S-TL-6J
‘J’ Stick – 1-3/8” x 8-1/2” – 16/Box	S-TL-16J
11 Ounce Cartridge – 1 Single	S-TL-HG
15 Ounce Cartridge -1 Single	S-TL-SG
11 Ounce Cartridges – 16/Case	S-TL-HGC
15 Ounce Cartridges – 12/Case	S-TL-SGC
10 Pound Can	S-TL-10P
40 Pound Pail	S-TL-40P
120 Pound Drum	S-TL-120D
400 Pound Drum	S-TL-400D

EQUA-LUBE EIGHTY

Product Code: A007

N.W. 15 Ounce / Size 15 Ounce

Sealweld Equa-Lube Eighty provides an insoluble film of lubricant to protect critical seal faces and reduce torque requirements. Extend valve service life by injecting Sealweld® Equa-Lube Eighty immediately after the hydrostatic test at the valve factory or repair facility. This will purge all test water from the seat pockets where corrosion commonly occurs. Protects against damage from pipeline contaminants, such as dirt, sand, line scale and welding slag at start-up. Insoluble in water, crude oil, natural gas, condensate and related by-products.

Recommended for use in new valves, wellhead valves, at refineries, pump and compressor stations and in gas distribution systems. Equally effective in both oil and gas facilities.

Product Details

Base Oil	Synthetic
Colour	Amber/ Brown
Drop Point	None
Texture	Tacky
Pressure	10,000 PSI
ASTM Penetration	210 – 290
Compatibility	Excellent
Solvent Resistance	Excellent
Special Additives	None
Particle Size	N/A
Composition	Semi-liquid
Temperature Range	-40 °C to +149 °C
	-40 °F to +300 °F

Order Details

Ordering Size	Part No.
‘J’ Stick – 1-3/8” x 8-1/2”- 1 Stick	S-EQ-J
‘J’ Stick – 1-3/8” x 8-1/2”- 16/Box	S-EQ-16J
11 Ounce Cartridge – 1 Single	S-EQ-HG
15 Ounce Cartridge – 1 Single	S-EQ-SG
11 Ounce Cartridges – 16/Case	S-EQ-HGC
15 Ounce Cartridges – 12/Case	S-EQ-SGC
10 Pound Can	S-EQ-10P
40 Pound Pail	S-EQ-40P
120 Pound Drum	S-EQ-120D
16 Ounce Brush Top Can	S-EQ-BT
16 Ounce Brush Top Can – 12/Case	S-EQ-BTC
400 Pound Drum	S-EQ-400D

VALVE CLEANER PLUS

Product Code: A009

N.W. 15 Ounce / Size 15 Ounce

Valve Cleaner Plus is Non-hazardous, environmentally friendly product designed to clean valve seal faces and internal sealant passages. In many cases, simply cleaning the seat sealant system and/or valve body will loosen seized metal components and clean build-up and debris from critical sealing surfaces. In many cases this may solve the problem.

This cleaner is a combination of solvent and semi-synthetic lubrication oils. Formulated to be injected directly into the seat sealant system to clean seal faces and sealant passages. Cycle the valve (if permitted) to ensure complete coverage, to allow the valve cleaner to soften old sealants and remove residual build-up from seal points. Valves with severe or persistent leakage may require more wait time. The best results are achieved by displacing the valve cleaner with equal quantities of lubricant/ sealant after cleaning. Recommended for use in ball, gate or plug valves and orifice fittings. For use at refineries, wellheads, pump or compressor stations and in gas distribution systems.

Product Details

Base Oil	Semi-synthetic
Colour	Black
Drop Point	+235 °C to +455 °F
Texture	Thin paste
Pressure	10,000 PSI
ASTM Penetration	250 – 340
Compatibility	Dispersant
Solvent Resistance	Excellent
Special Additives	N/A
Special Additives	Molybdenum Disulfide
Composition	Semi-liquid
Temperature Range	-40 °C to +204 °C
	-40 °F to +400 °F

Order Details

Ordering Size	Part No.
10 Ounce Cartridge – 1 Single	S-VCP-HG
14 Ounce Cartridge – 1 Single	S-VCP-SG
10 Ounce Cartridges – 16 per Case	S-VCP-HGC
14 Ounce Cartridges – 12 per Case	S-VCP-SGC
9 Pound Can	S-VCP-9P
36 Pound Pail	S-VCP-36P
110 Pound Drum	S-VCP-110D
360 Pound Drum	S-VCP-360D

Sealweld® Odyssey Cleaning Solvent

Product Code: A009

N.W. 15 Ounce / Size 15 Ounce

Sealweld® Odyssey Cleaning Solvent is a synthetic industrial cleaning solvent. Excellent for removing heavy deposits of grease, lubes and heavy oils, as well as removing sludge and dirt from metal parts. Sealweld® Odyssey Cleaning Solvent will not harm metal, most types of rubber, plastic or concrete. It is excellent for dissolving asphaltene build-up, and has many other uses in the industrial marketplace. Sealweld® Odyssey Cleaning Solvent does not contain water and is not water-soluble, on the contrary, it leaves behind a protective barrier that inhibits spot rust.

Use as a valve body flushing solvent for seized or hard to turn valves

Non-Flammable
Non-Hazardous
Non-Polluting

Product Specifications

Temperature Range	-29 °C to +232 °C
	-20 °F to +450 °F

Order Details

Ordering Size	Part No.
Spray Bottle	K-OS-SB
Bottel-4 Liters	K-OS-4L
Pail-5 Gallons	K-OS-SG
Drum-45 Gallons	K-OS-4SG

Sealweld® Summit #7030

Product Code: A009

N.W. 15 Ounce / Size 15 Ounce

Sealweld® Summit #7030 s our premium valve lubricant designed for use in a wide variety of applications. This specialty blend of synthetic oils, low-temperature additives and micronized PTFE particles makes this product ideal for frequently-operated and worn valves with minor seat leakage. Summit #7030 is tacky, yet pliable, which makes it resistant to washout in year-round service on valves ranging from ambient conditions to cold liquefied gases. This product is insoluble in water and ideal for use in oil, natural gas and related by-products. Use Summit #7030 when servicing ball, gate, plug, blow down, pig launcher/receiver valves in refineries, wellheads, pump or compressor stations and gas distribution systems.

Product Specifications

Base Oil	Synthetic
Colour	Grey
Drop Point	None
Texture	Tacky
Pressure	10,000 PSI
ASTM Penetration	210-290
Compatibility	Excellent
Solvent Resistance	Excellent
Special Additives	PTFE
Particle Size	Semi-micronized
Composition	Semi-liquid
Temperature Range	-40 °C to +205 °C
	-40 °F to +400 °F

Order Details

Ordering Size	Part No.
Spray Bottle	K-OS-SB
Bottel-4 Liters	K-OS-4L
Pail-5 Gallons	K-OS-SG
Drum-45 Gallons	K-OS-4SG

Lubricants & Cleaners

Eternia lube #1000

Low Temperature Lubricant D-1014

Total-lube #911

Equa-Lube Eighty

Valve Cleaner Plus

Sealweld® Odyssey Cleaning Solvent

Sealweld® Summit #7030